Bobcat T66

Kommentare

BOBCAT T66 SKID STEER LOADER

Year of manufacture 2021
Operating hours: approx. 1,852

Equipment:

3-point seat belt
Air conditioning
• 400 mm wide rubber tracks
• 5-inch deluxe instrumentation (radio pre-installation)
• Adjustable suspension seat with high back cushion
• High-flow hydraulics: variable flow/maximum flow
• Back-up alarm
• BICS locking system
• Bob-Tach™ attachment system
• Pressurized deluxe cab with air conditioning
• Bucket parallelism, two-way (with on/off switch)
• Engine and hydraulic system shutdown
• Heavy-duty hydraulics
• Horn
• Key start
• LED work lights, front and rear
• Boom arm lock
• Machine IQ (telematics)
• Instruments
• Parking brake
• Safety bar
• SJC joystick control
• Spark arrester silencer
• Two travel speeds

Construction/industrial bucket width 203 cm wide
Pallet fork

Dimensions:
Operating height 3909.6 mm
Height with driver's cab 2044.7 mm
Departure angle 25.0°
Ground clearance 213.7 mm
Ground contact length 1378.0 mm
Length without attachments 2717.8 mm
Length with standard bucket 3427.0 mm
Tipping in ground position 30.0°
Dumping height with standard bucket 2395.8 mm
Height to bucket pin 3048.0 mm
Dumping reach at maximum height 933.0 mm
Dumping angle at maximum height 37.0°
Tipping fully raised at maximum height 94.0°
Width with standard bucket 2030 mm
Turning radius with standard bucket 2103.7 mm
Track width, 320 mm crawlers 1381.8 mm
Width over crawlers, 400 mm crawlers: 1781.8 mm
Performance data
Breakout force via lifting cylinder 2269 daN
Breakout force via tilting cylinder 2179 daN
Ground pressure 24.10 kPa
Mobile payload (ISO 14397-1) 1115 kg
Thrust force 3573 daN
Tipping load (ISO 14397-1) 3175 kg
Cycle times
Raising the lifting arms 4.0 s
Lowering the lifting arms 2.8 s
Tipping the bucket 1.7 s
Tipping the bucket 2.5 s
Weights
Operating weight 4296 kg
Transport weight 3712 kg
Ground pressure 39.00 kPa

Engine
Make/model Bobcat 2.4 l 97/68 EC Stage V
Emission level Stage V
Fuel Diesel
Cooling Liquid
Power at 2600 rpm: 54.5 kW
Torque at 1800 rpm (SAE J1995 gross): 283.9 Nm
Number of cylinders: 4
Displacement 2400 cm3
Bore 90.0 mm
Stroke 94.0 mm
Lubrication Gear pump pressure
Crankcase ventilation Closed ventilation
Air filter Replaceable dry paper filter with safety cartridge
Ignition Diesel compression ignition
Starting aid Glow plugs

Electrics
Alternator 90 A - open frame with internal regulator
Battery 12 V - 600 A for cold start at -18 °C - 115 Min.
Reserve capacity at 25 A
Starter 12 V GEAR PUMP 4.29 HP (3.2 kW]

Hydraulic system
Pump type: Motor-driven gear pump
Discharge rate 66.50 L/min
Discharge rate high-performance hydraulics 101.80 L/min
System pressure at quick couplings 23.8-24.5 MPa
Control valve Open-center valve with 3 spools with floating position
in lifting position and electrically controlled additional spool
Hydraulic filter PREMIUM, ANTI-WEAR,
MULTI-GRADE OIL ISO V646, MINERAL OIL BASED
Oil lines SAE standard lines, hoses and fittings

Hydraulic cylinders
Lift cylinders (2) Double-acting
Bore 69.9 mm
Piston rod 41.4 mm
Stroke 540.0 mm
Tilt cylinder (2) Double acting
Bore 69.9 mm
Piston rod 38.1 mm
Stroke 330.7 mm
Travel drive
Gearbox: Continuously variable tandem hydrostatic piston pumps to drive two fully reversible hydrostatic motors
Track tensioning by grease cylinders and spring rollers with triple flange
Main drive Fully hydrostatic rubber track drive
Traction
Track width 400 mm wide, rubber
Max. travel speed (low range - standard) 10.4 km/h
Max. travel speed (high range - optional) 16.4 km/h
Subject to errors and second-hand sales